串口命令中的批处理相关命令怎么使用？

hs_hddscan · 发表于 2010-5-8 19:09:45

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区

您需要登录才可以下载或查看，没有账号？立即注册

x

LEVEL SIX COMMANDS:
Batch File Commands See also the common commands *, @, and |. These commands define the batch file flow control. Command Description Bx Run Batch File x - Batch file number 0 through 2, default = batch 0 Dx List Batch File x - Batch file number 0 through 2, default = batch 0 Ex Enter Batch File x - Batch file number 0 through 2, default = batch 0 * Special Function for batch file: *1 Pause batch file execution until input *2,x Delay x milliseconds *3,x Branch to Label x *4,x Increment head and branch to Label x *5 Clear monitor screen *6 Stop on error *7,x Load batch loop counter with x. *8,x Decrement batch loop counter, Branch to Label x if not 0. @x Batch File Label. During batch file entry, define this location as Label x. x - Single digit numeric label specification. | Batch file terminator Terminates the entry of batch files. *Note: For commands Bx, Dx, and Ex above, if x is greater than 2, batch #0 will be used.
怎么运用以上批处理命令啊？

heming176613158 · 发表于 2010-5-8 19:29:13

dftghrt bgh54y

[求助] 串口命令中的批处理相关命令怎么使用？

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区