午夜幽兰 发表于 2005-7-19 09:40:15

HRT维修工具使用之MAXTOR.INI文件特性

区段    关键值    用途
      Analysis goes under the version of a microcodeExample:DAC10SC0=DiamondMax Plus 40 DRACODAH017K0=D540X-4D ROMULUSDAH019K0=D540X-4D ROMULUSDAK019K0=D540X-4D ROMULUS-60gbGAK819K0=D540X-4G ROMULUS
      定义伺服模块操和方式，与标准方式有所不同，段内容应当如下：CRC for 1-t Non Zero Part=1Sector by Sector=2
      在自动编辑伺服区过程中，定义模块名转换规则。Name of a key - heading of the module subject to editingValue of a key - heading of the module after editing. Even there is a vertical feature after which the method of recalculation of the control sum (0 - usual is placed, others - according to section .The binary code "00" in lines is replaced with a sign on a return apostrophe.例如：ONP_ILTS=TAP_LD1 |1ONG_ILTS=TAP_LO0 |0ONU_ILTS = _ UILTS00|0_UILTS10 = _ UILTS00|0OND_CM ` S=MDSC 1|0
      定义P-LIST缺陷表译码方式段内容应当如下：16bit=10 0001999902990405080932bit=10 00010203049906070809
      定义G-LIST缺陷表译码方式段内容应当如下：Nike=0 8 99 99 99 99 08 99 99 99 99Fireball3=1 8 99 99 12 13 16 08 09 10 11DMP9=1 8 18 19 16 17 20 12 13 14 15


Section    Key    Purpose
Nominal section    BLA copies list    Defines rules of formation of the second copy of service area. Depending on family, can accept the following values:BLA copies list=7,8BLA copies list=6,7Rule of selection idle time: correct the given key and we look service area. If on physical cylinders a minus 1 and the minus 2 читсатся same, means a line is entered correctly. Is not present - it is tasted other values.
    Zone formula    Name of the formula from section on which decoding zoned distribution is made
    P-list formula    Name of the formula from section on which decoding P-LIST is made
    G-list formula    Name of the formula from section on which decoding G-LIST is made
    固件    Coordinates of full service area
    POKER    计算控制和的方法，如果驱动器的处理芯片是DSP，那么这个键值就可以不用设置，否则要输入如下键值：POKER=1
    UBAx    伺服区所有模块注释 (与驱动器ID无关)，located on given UBA. It allows to solve a problem of different identifiers of the modules located on different головкам.
    CP List    It is used for removal CP00 in the end of the list

另外值得一提的是有关区段的用途，与HRT综合工具里的其它相关修复程序相比 HRT_MAXTOR.EXE程序需要从nominal секций获得重要参数。如果驱动器未定义（例如, 遇到脱机模式）作为INI-区段将会显示为：“BAD”。. 那么这些参数是如何参与运行的呢？以何种规则，如何调整？它们是保存在区段里吗？这就是说，在对驱动器进行修复之前，如果驱动器未定义，那么就需要清除以前的区段的内容，然后再在这个区段里重新写入合适的内容。

alol 发表于 2005-8-2 02:23:53

2121212121212121

卫斯理 发表于 2005-8-4 17:23:49

Re:HRT维修工具使用之MAXTOR.INI文件特性

狂人s 发表于 2005-8-8 19:33:25

我要看我要看我要看我要看.啊啊啊

tom-guo 发表于 2005-8-12 13:05:20

我要看看,我要看看,我要看看,

king680913 发表于 2005-8-13 10:10:28

就是高人
一定要看看

3q3q

视之霸 发表于 2005-8-15 17:03:53

tie tie 看一下也很难啊

roweyoung 发表于 2005-9-3 17:31:58

HRT维修工具使用之MAXTOR.INI文件特性

hxkj 发表于 2005-9-27 19:32:41

HRT维修工具使用之MAXTOR.INI文件特性

hddwumnm 发表于 2005-10-1 18:45:59

页: [1] 2 3 4 5 6
查看完整版本: HRT维修工具使用之MAXTOR.INI文件特性