关于ＬＢＡ＝０

cscip · 发表于 2012-2-5 14:10:38

这个的定义大家要看好，不是所有ＬＢＡ＝０都是同一问题造成的~！
自个看吧，呵呵
````````````````````````
(ctrl+z)

F3 T>/2

F3 2>Z

Spin Down Complete
Elapsed Time 0.146 msecs
F3 2>U

Spin Up Complete
Elapsed Time 6.864 secs

this part is not necessary, use when first try fails

F3 2>/

F3 T>F712
Byte:0712: RealTimeUpdatedFlags = 00 00
Byte:0712: Bit:0, HPA_SET_BY_SETMAX = 0
Byte:0712: Bit:1, HPA_SET_BY_SETMAX_EXT = 0
Byte:0712: Bit:2, DCO_SET_ACTIVE = 0
Byte:0712: Bit:3, CONGEN_READ_FROM_MEDIA = 0 <- configuration not loaded from surface

F3 T>F,,22

Drive Configuration restored to defaults.

F3 T>F712
Byte:0712: RealTimeUpdatedFlags = 08 00
Byte:0712: Bit:0, HPA_SET_BY_SETMAX = 0
Byte:0712: Bit:1, HPA_SET_BY_SETMAX_EXT = 0
Byte:0712: Bit:2, DCO_SET_ACTIVE = 0
Byte:0712: Bit:3, CONGEN_READ_FROM_MEDIA = 1 <- done

(end of part to skip at first attempt)

F3 T>/1

F3 1>N1

F3 1>/

F3 T>m0,2,2,0,0,0,0,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 00, Max Certify Rewrite Retries = 0000

User Partition Format 5% complete, Zone 00, Pass 00, LBA 00008DED, ErrCode 00000080, Elapsed Time 0 mins 05 secs
User Partition Format Successful - Elapsed Time 0 mins 05 secs

F3 T>

(finished, power off)